NC42 removal of propeller shaft

[Micheal Carolin]

Hi All. A question from my mechanic who I have asked to remove my propeller (which has a ding in it) and shaft for some balance and maintenance.

Once the propeller is removed and gearbox disconnected, is it possible to slide the shaft out from the out side or does the rudder get in the way?

It would make sense that this is possible but it’s a boat!

Many thanks MC

[Piers Covill]

Hi Michael

I can only comment for my NC43 – the prop shaft will slide along the rudder *just* but it is a squeeze. The first time I removed it I unbolted the P bracket to give a little more room.

Good luck

Best wishes Piers

[Charles Keiller]

Hi Michael,
I removed the shaft from Astraia our 42 about 12 years ago and it did pass the rudder but I can’t remember if we removed the Cutlass bearing first to give a slightly better angle.As Piers says it is still a tight squeeze.
Good luck
Charles

[Micheal Carolin]

Thanks Piers, I’ll pass the comments on and see how we go Cheers MC

[Micheal Carolin]

Thanks Charles I’ll pass the comments on and see how we go. The P bracket mounting needs some TLC anyway, I’m considering my options with it so you may have answered more than on question for me. Cheers MC

[Author]

Posts